Tool Material Selection for Titanium Alloy TC11 Deep-Hole Drilling

Home > Archive>Volume 35, Issue 3, 2005 > Online First

Tool Material Selection for Titanium Alloy TC11 Deep-Hole Drilling
DOI:
                        
                    
CSTR:
                        [cstr]
                    
Author:
                        

Find this author on All Journals
Find this author on BaiDu
Search for this author on this site

                    
Affiliation:
Clc Number:
Fund Project:

Article

Figures

Metrics

Reference

Related [20]

Cited by

Materials

Comments

Abstract:

Key words:钛合金%深孔钻削%刀片材料%刀具磨损%硬质合金

Reference

[1]Zhu Lin,Wang Keyin.Tool Material Selection for Titanium Alloy TC11 Deep-Hole Drilling[J].Aerospace Materials & Technology,2005,35(3):54-56.

[2]Waiter.New Cutting Tool of Walter for Titanium Alloy[J].Aeronautical Manufacturing Technology,2011(7).

[3]TIAN Wei,WANG Biao.Combustion Characteristics of Titanium Alloy TC11[J].Gas Turbine Experiment and Research,2012(3):40-43,11.

[4]田荣鑫,史耀耀,杨振朝,梁永收,石凯.Effect of Tool Wear on Residual Stress in Milling of Titanium Alloy TC17[J].Aeronautical Manufacturing Technology,2011(Z1).

[5]Wang Gaochao,Cao Chunxiao,Dong Hongbo,Li Zhenxi,Yang Gang,Zhao Xiaobin.Superplastic Deformation Mechanism of Titanium Alloy TC11 at Maximum m Value[J].Acta Aeronautica et Astronautica Sinica,2009,30(2):357-361.

[6]郎波,张田仓,陶军,郭德伦.Microstructure in Linear Friction Welded Dissimillar Titanium Alloy TC11 and TC17 Joint[J].Aeronautical Manufacturing Technology,2012(13):140-144.

[7]周超,李勋,陈五一.Cutting Tool Selection and Cutting Parameter Optimization of Titanium Alloy Rough Milling[J].Aeronautical Manufacturing Technology,2015(10).

[8]ZHAO Xiao-bin,WANG Gao-chao,CAO Chun-xiao,LI Zhen-xi,YANG Gang,FAN Ding-bing.Maximum m Superplasticity Deformation for TC11 Titanium Alloy[J].Journal of Aeronautical Materials,2008,28(2):5-8.

[9]LIN Cui,HU Ge,LIANG Jing,ZHAO Qing,DU Nan,WANG Li-qiang.Dissolution Behavior of Corrosion Processing for TC1 and TC4 Titanium Alloy[J].Journal of Aeronautical Materials,2010,30(6).

[10]刘道庆,;李洪恩.Annealing Process of TC18 Titanium Alloy[J].Aircraft Design,2014(3):25-28.

[11]吴欣,康慧,朱颖,曲平.TC4 Titanium Alloy Vacuum Brazing[J].Aeronautical Manufacturing Technology,2004(9):67-69.

[12]周成,李海滨,周长军.Research on Tool Wear Used in High-Speed Milling New TC21 Titanium Alloy[J].Aeronautical Manufacturing Technology,2013(14).

[13]孙海全,朱小兵,肖晓青.Study on Hot Deformation Properties of TC11 Titanium Alloy[J].Aeronautical Manufacturing Technology,2015(8).

[14]万晓慧,杜欲晓.Argon Tungsten-Arc Welding Process Research on TC11 Titanium Alloy[J].Aeronautical Manufacturing Technology,2011(16).

[15]姚罡,李晋炜,张庆云,陆业航.Analysis on Electron Beam Welding Joint Microstructure of TC11 Titanium Alloy[J].Aeronautical Manufacturing Technology,2011(16).

[16]YANG Yan-hui,LIU Dong,LUO Zi-jian.Evaluation of Microstructure Homogeneity in TC11 Titanium Alloy Blisk Forging[J].Journal of Aeronautical Materials,2012,32(1):25-29.

[17]张蕾,侯金保,李京龙,张赋升.Diffusion Bonding of Hydrogenated TC4 Titanium Alloy[J].Aeronautical Manufacturing Technology,2011(16).

[18]Yi,Jianzhang.Measurements of Fractal Dimensions for High - Tempear-ture Tensile Fracture Surfaces of TC11 Titanium Alloy[J].Journal of Shenyang Institute of Aeronautical Engineering,1994(2):1-4.

[19]CHEN Hui-qin,CAO Chun-xiao,GUO Ling,LIN Hai.Hot Deformation Globularization Kinetic Processes of TC11 Titanium Alloy with Lamellar Structure[J].Journal of Aeronautical Materials,2009,29(1):37-42.

[20]LIU Hong-bin,CHEN Wei,DU Wen-jun.Experimental Investigation on Low and High Cycle Combined Fatigue Performance of TC11 Titanium Alloy[J].Gas Turbine Experiment and Research,2011,24(2).

Cited by

Comments

分享到微博

Submit

Get Citation

Copy

Article Metrics

Abstract:975
PDF: 2159
HTML: 177
Cited by: 0

History

Received:
Revised:
Adopted:
Online: November 28,2016
Published:

About Journal

Editorial Board

Guide for Authors

Get Citation

Share

Article Metrics

History

Article QR Code