天线罩用宽频透波材料的发展现状
作者:
作者单位:

航天特种材料及工艺技术研究所


Progress of Broadband Wave鄄Transparent Materials for Radome
Author:
  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献 [101]
  • |
  • 相似文献 [20]
  • | | |
  • 文章评论
    摘要:

    综述了天线罩用宽频透波材料的发展现状,分析了影响透波材料性能的因素,系统讨论了宽频透
    波天线罩的制备方法。研究指出介电性能是评价材料透波性能的一个重要标准,选用低介电材料和提高材料
    孔隙率可实现材料宽频透波,新的介质材料的开发和研究将是今后天线罩制造技术发展的一个主要发展方向。

    Abstract:

    Research progress of broadband wave鄄transparent ceramic radome materials is reviewed. The influen鄄
    cing factors of wave鄄transparent materials performance are analyzed,and the preparation methods of ceramic radome
    materials are systematically discussed. It is suggests that the dielectric properties is an important criterion for evaluating
    wave鄄transparent performance. Broadband wave鄄transparent performance of ceramic radome can be achieved by selec鄄
    ting a low dielectric material and increasing porosity,and the development and research of novel dielectric materials is
    an important direction of next鄄generation radome material preparation.

    参考文献
    [1] Chase V A, Copel R L. Development of a 1200毅F ra鄄
    dome[R]. Interim Engernering Report 3, AD 429387, 1963
    [2] 李超, 刘建超, 陈青. 航天透波复合材料的研究进
    展[J]. 高科技纤维与应用, 2003,28(6):34-39
    [3] 黎义, 张大海, 陈英,等. 航天透波多功能材料的研
    究进展[J]. 宇航材料工艺, 2000,30(5):1-5
    [4] 艾涛, 王如敏. 航天透波材料最新研究进展[J]. 材
    料导报, 2004,18(11):12-15
    [5] 胡连成,黎义,于翘. 俄罗斯航天透波材料现状考察
    [J]. 宇航材料工艺,1994(1):48-52
    [6] 韩爽,胡海峰,齐共金. 无机天线罩材料的研究进展
    [J]. 纤维复合材料,2006(4):64-68
    [7] Clark W H. Millimeter wave seeker technology[R].
    ADA-345819,1992
    [8] 韩桂芳, 陈照峰, 张立同. 高温透波材料研究进展
    [J]. 航空材料学报, 2003,23(1):57-61
    [9] 张漠杰. 超音速导弹天线罩及其设计[J]. 制导与引
    信,2000(5):1-5
    [10] 刘丽. 天线罩用透波材料[M]. 北京:冶金工业出
    版社,2008
    [11] 陈虹,胡利明,贾光耀, 等. 陶瓷天线罩材料的研究
    进展[J]. 硅酸盐通报,2002(4):40-44
    [12]于技强,刘敬松,霍冀川. 透波介质材料的介电性能
    及测试方法[J]. 四川兵工学报,2011,32(4):99
    [13] 刘顺华,刘军民,董星龙. 电磁波屏蔽及吸波材料
    [M]. 北京:化学工业出版社,2006:108-134
    [14] 夏文干, 韩养军, 杨浩, 等. 高功率高透波材料的
    研究[J]. 高科技纤维与应用,2003,8(2):39-108
    [15] 王峰,王继辉,肖永栋. 透波复合材料的研究进展
    [C]椅第16 届玻璃钢/ 复合材料学术年会论文集,2006:285-
    289
    [16][ 16] Crum S. Wireless devices set new criteria for high fre鄄
    quency materials [ J]. Electroic Pachaging Producing,1999,39
    (4):32-35
    [17] 杨备. 宽频透波陶瓷基复合材料夹层结构设计、仿
    真与验证[D]. 国防科学技术大学, 2010
    [18] 杜耀惟. 天线罩电信设计方法[M]. 北京: 国防工
    业出版社, 1993:10
    [19] 徐洁, 罗发, 朱冬梅, 等. 孔隙率和孔径对反应烧
    结多孔氮化硅陶瓷介电性能的影响[J]. 硅酸盐学报, 2007,
    35(10):1327-1331
    [20] 邵颖峰,贾德昌,周玉. 孔隙率对20% BN/ Si3 N4 复
    合多孔陶瓷力学与介电性能的影响[J]. 稀有金属材料与工
    程,2009,38(增刊2):479-482
    [21] 李军奇, 罗发, 朱冬梅, 等. 氮化硅多孔陶瓷的制
    备及微波介电性能研究[J]. 稀有金属材料与工程, 2006, 35
    (增刊2):173-176
    [22] 朱新文, 江东亮, 谭寿洪. 多孔陶瓷的制备、性能
    及应用: 多孔陶瓷的制造工艺[J]. 陶瓷学报, 2003,24(1):
    40-45
    [23] 刘富德, 陈森风, 张书政. 多孔陶瓷材料的发展状
    况[J]. 材料导报,2000,14(6):33-34,51
    [24] 王慧, 曾令可. 多孔陶瓷-绿色功能材料[J]. 中国
    陶瓷, 2002,38(3):6-8,19
    [25] Ryshkewitch E. Compression strength of porous sin鄄
    tered alumina and zirconia[J]. Journal of the American Ceramic
    Society,1953,36(2):65-68
    [26] 孙银宝. 氮化硅基多孔透波材料制备及其性能表
    征[D]. 哈尔滨: 哈尔滨工业大学, 2009
    [27] 张晓霞, 山玉波, 张伟儒,等. 高气孔、高强Si3 N4
    陶瓷材料的研究[J]. 稀有金属材料与工程, 2008,37(增刊
    1):713-716
    [28] Yu J L,Wang H J, Zhang J, et al. Gelcasting prepa鄄
    ration of porous silicon nitride ceramics by adjusting the content of
    monomers[J]. J. Sol鄄Gel. Sci. Technol. ,2010,53(2):515-523
    [29] Yu J L,Wang H J, Zhang J, et al. Effect of monomer
    content on physical properties of silicon nitride ceramic green body
    prepared by gel casting [ J]. Ceramics International,2009,35
    (3):1039-1044
    [30] Yu J L,Wang H J, Zhang J, et al. Neural network
    modeling and analysis of gel casting preparation of porous Si3 N4
    ceramics[J]. Ceramics International,2009,35(7):2943-2950
    [31] Yu J L, Wang H J, Hou J M, et al. Investigation of
    flexural strength and porosity of porous Si3 N4 ceramics through or鄄
    thogonal experimental design[J]. Journal of Ceramic Processing
    Research, 2008,9(6): 624-629
    [32] Frederick H S, Juris V. Controlled density silicon ni鄄
    tride material[C]椅Huddareston G K ed. Proceeding of the 16th
    Symposium on Electromagnetic Windows. Atlanta: Georgia Insti鄄
    tute of Technology, 1982:81-86
    [33] Clark W H. Millimeter wave seeker technology[R].
    AD A345819, 1999
    [34] Verzemnicks J, Simpson F H. Silicon nitride articles
    with controlled multidensity regions[P]. US, 5103239,1992
    [35] Talmy I G, Martin C A, Haught D A, et al. Electro鄄
    magnetic window[P]. US, 5573986,1996
    [36] Medding J A. Nondestructive evaluation of zirconium
    phosphate bonded silicon nitride radomes[M]. Blacksburg, VA:
    Virginia Polytechnic Institute and State University, 1996
    [37] 张大海, 黎义, 高文, 等. 高温天线罩材料研究进
    展[J]. 宇航材料工艺, 2001,31(6):1-3
    [38] Leggett H. Ceramic broadband radome [ P]. US,
    4358772,1982
    [39] Barta J, Manela M. Si3 N4 and Si2 N3 O for high per鄄
    formance radomes [ J]. Materials Science and Engineering A,
    1985,71:265-272
    [40] Barta J, Manela M. Preparation and properties of sili鄄
    con nitride for radome applications[C]椅Proceedings of the 16th
    Symposium on Electromagnetic Windows, 1982:87
    [41] Goto T, Fujii A, Kawai C. Radome [ P]. US,
    6091375,2000
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

余娟丽.天线罩用宽频透波材料的发展现状[J].宇航材料工艺,2013,43(2).

复制
分享
文章指标
  • 点击次数:1837
  • 下载次数: 2722
  • HTML阅读次数: 196
  • 引用次数: 0
历史
  • 在线发布日期: 2016-11-28
文章二维码
《宇航材料工艺》2025年青年编委招募启事

关闭