首页 > 过刊浏览>2022年第52卷第1期 >11-21. DOI:10.12044/j.issn.1007-2330.2022.01.002
PDF HTML阅读 XML下载 导出引用 引用提醒
3D打印用硅基陶瓷前驱体研究进展
作者:
作者单位:

1.中国科学院化学研究所，中国科学院极端环境高分子材料重点实验室，北京 100190;2.中国科学院大学，化学与化工学院，北京 100049

中图分类号:

O634.4+1


Research Progress on Silicon-based Ceramic Precursors for 3D Printing
Author:
Affiliation:

1.Key Laboratory of Science and Technology on High-tech Polymer Materials， Chinese Academy of Sciences， Beijing 100190;2.School of Chemistry and Chemical Engineering， University of Chinese Academy of Sciences， Beijing 100049

  • 摘要
    • | |
  • 访问统计
    • |
  • 参考文献 [63]
    • |
  • 相似文献 [20]
    • | | |
  • 文章评论
    摘要:

    聚合物前驱体转化法可使用聚合物的成型加工工艺实现陶瓷材料的加工制备，在高性能陶瓷和复合材料制备方面显示出独特的优势。3D打印技术在陶瓷前驱体成型中的应用为制备复杂结构陶瓷制件提供了全新的可能。本文从3D打印硅基陶瓷前驱体树脂体系、打印技术及其应用等方面，系统总结了近年来3D打印制备SiCO、SiCN、SiC及含B、Zr等元素硅基陶瓷材料前驱体的研究进展，并进一步指出了3D打印陶瓷前驱体面临的挑战与研究方向。

    Abstract:

    Preceramic polymers can be processed or shaped using conventional polymer-forming techniques， which show unique advantages in the preparation of high-performance ceramics and composites. The application of 3D printing technology in ceramic precursor molding provides a new possibility for the preparation of ceramic parts with complex structure. In this paper， the research progress on preparation of SiCO， SiCN， SiC， as well as B， Zr and other elements containing silicon-based ceramic precursors by 3D printing in recent years are systematically summarized from the aspects of precursor resin types， 3D printing technologies and their applications. The challenges and research direction faced by 3D printing ceramic precursors are pointed out in combination with the future development needs.

    参考文献
    [1] COLOMBO P， MERA G， RIEDEL R， et al. Polymer-derived ceramics：40 years of research and innovation in advanced ceramics[J].Journal of the American Ceramic Society， 2010， 93（7）：1805-1837.
    [2] MERA G，NAVROTSKY A， SEN S， et al. Polymer-derived SiCN and SiOC ceramics-structure and energetics at the nanoscale [J].Journal of Materials Chemistry A，2013， 1（12）：3826.
    [3] LONG X， SHAO C， WANG J. Continuous SiCN fibers with interfacial SiCxNy phase as structural materials for electromagnetic absorbing applications [J]. ACS Applied Materials & Interfaces， 2019， 11（25）：22885-22894.
    [4] BARROSO G， LI Q， BORDIA RK， et al. Polymeric and ceramic silicon-based coatings-a review [J]. Journal of Materials Chemistry A， 2019， 7（5）：1936-1963.
    [5] VAKIFAHMETOGLU C， ZEYDANLI D， COLOMBO P. Porous polymer derived ceramics [J]. Materials Science and Engineering： Reports， 2016， 106， 1-30.
    [6] ZHAO H， CHEN L， LUAN X， et al. Synthesis， pyrolysis of a novel liquid SiBCN ceramic precursor and its application in ceramic matrix composites [J]. Journal of the European Ceramic Society， 2017， 37（4）：1321-1329.
    [7] FU S Y， ZHU M， ZHU Y F. Organosilicon polymer-derived ceramics： An overview [J]. Journal of Advanced Ceramics， 2019， 8（4）：457-478.
    [8] NGO T D， KASHANI A， IMBALZANO G， et al. Additive manufacturing （3D printing）： A review of materials， methods， applications and challenges [J]. Composites Part B： Engineering， 2018， 143， 172-196.
    [9] CHEN Z W， LI Z Y， LI J J，et al. 3D printing of ceramics： A review [J]. Journal of the European Ceramic Society， 2019， 39（4）：661-687.
    [10] ECKEL Z C， ZHOU C Y， MARTIN J H， et al. 3D printing additive manufacturing of polymer-derived ceramics [J]. Science， 2016， 351（6268）：58-62.
    [11] ZANCHETTA E， CATTALDO M， FRANCHIN G， et al. Stereolithography of SiOC ceramic microcomponents [J]. Advanced Materials， 2016， 28（2）：370-376.
    [12] DE HAZAN Y， PENNER D. SiC and SiOC ceramic articles produced by stereolithography of acrylate modified polycarbosilane systems [J]. Journal of the European Ceramic Society， 2017， 37（16）：5205-5212.
    [13] BRIGO L， SCHMIDT JEM， GANDIN A， et al. 3D nanofabrication of SiOC ceramic structures [J]. Advanced Science， 2018， 5（12）：1800937.
    [14] BRINCKMANN S A， PATRA N， YAO J， et al. Stereolithography of SiOC polymer-derived ceramics filled with SiC micronwhiskers [J]. Advanced Engineering Materials， 2018， 20（11）：10.
    [15] SCHMIDT J， COLOMBO P. Digital light processing of ceramic components from polysiloxanes [J]. Journal of the European Ceramic Society， 2018， 38（1）：57-66.
    [16] WANG X， SCHMIDT F， HANAOR D， et al. Additive manufacturing of ceramics from preceramic polymers： A versatile stereolithographic approach assisted by thiol-ene click chemistry [J]. Addit. Manuf.， 2019， 27：80-90.
    [17] LI Z， CHEN Z， LIU J， et al. Additive manufacturing of lightweight and high-strength polymer-derived SiOC ceramics [J]. Virtual and Physical Prototyping， 2020，15（2）：1-15.
    [18] SCHMIDT J， BRIGO L， GANDIN A， et al. Multiscale ceramic components from preceramic polymers by hybridization of vat polymerization-based technologies [J]. Addit. Manuf.， 2019，30： 30100913.
    [19] WEI L， LI J， ZHANG S， et al. Fabrication of SiOC ceramic with cellular structure via UV-assisted direct ink writing [J]. Ceramics International， 2020， 46（3）：3637-3643.
    [20] BRODNIK NR， SCHMIDT J， COLOMBO P， et al. Analysis of multi-scale mechanical properties of ceramic trusses prepared from preceramic polymers [J]. Additive Manufacturing， 2020， 31：100957.
    [21] HUNDLEY JM， ECKEL ZC， SCHUELLER E， et al. Geometric characterization of additively manufactured polymer derived ceramics [J]. Additive Manufacturing， 2017， 18： 95-102.
    [22] BAUER J， CROOK C， GUELL IZARD A， et al. Additive manufacturing of ductile， ultrastrong polymer-derived nanoceramics [J]. Matter.， 2019， 1（6）：1547-1556.
    [23] XI L， LIU Z， SU J， et al. UV-activated hydrosilylation of （Me-Cp）Pt（Me）3： Enhanced photocatalytic activity， polymerization kinetics， and photolithography [J]. Journal of Applied Polymer Science， 2019， 136（47）：48251.
    [24] O''MASTA MR， STONKEVITCH E， PORTER KA， et al. Additive manufacturing of polymer‐derived ceramic matrix composites [J]. Journal of the American Ceramic Society， 2020， 103（12）：6712-23.
    [25] PIERIN G， GROTTA C， COLOMBO P， et al. Direct ink writing of micrometric SiOC ceramic structures using a preceramic polymer [J].Journal of the European Ceramic Society， 2016， 36（7）：1589-1594.
    [26] SCHMIDT J， ALTUN AA， SCHWENTENWEIN M， et al. Complex mullite structures fabricated via digital light processing of a preceramic polysiloxane with active alumina fillers [J]. Journal of the European Ceramic Society， 2019， 39（4）：1336-1343.
    [27] FIOCCO L， ELSAYED H， BADOCCO D， et al. Direct ink writing of silica-bonded calcite scaffolds from preceramic polymers and fillers [J]. Biofabrication， 2017， 9（2）：025012.
    [28] BERNARDO E， COLOMBO P， DAINESE E， et al. Novel 3D wollastonite-based scaffolds from preceramic polymers containing micro- and nano-sized reactive particles [J]. Advanced Engineering Materials， 2012， 14（4）：269-274.
    [29] FU S Y， HU H R， CHEN J J， et al. Silicone resin derived larnite/C scaffolds via 3D printing for potential tumor therapy and bone regeneration [J]. Chemical Engineering Journal， 2020， 382：122928.
    [30] ZOCCA A， FRANCHIN G， ELSAYED H， et al. Direct ink writing of a preceramic polymer and fillers to produce hardystonite （Ca2ZnSi2O7） bioceramic scaffolds [J]. Journal of the American Ceramic Society， 2016， 99（6）：1960-1967.
    [31] ELSAYED H， SINICO M， SECCO M， et al. B-doped hardystonite bioceramics from preceramic polymers and fillers： Synthesis and application to foams and 3D-printed scaffolds [J]. Journal of the European Ceramic Society， 2017， 37（4）：1757-1767.
    [32] ELSAYED H， COLOMBO P， BERNARDO E. Direct ink writing of wollastonite-diopside glass-ceramic scaffolds from a silicone resin and engineered fillers [J]. Journal of the European Ceramic Society， 2017， 37（13）：4187-4195.
    [33] SHAO D， LU M M， XU D， et al. Carbon dots for tracking and promoting the osteogenic differentiation of mesenchymal stem cells [J]. Biomaterials Science， 2017， 5（9）：1820-1827.
    [34] GORJAN L， TONELLO R， SEBASTIAN T， et al. Fused deposition modeling of mullite structures from a preceramic polymer and γ-alumina [J]. Journal of the European Ceramic Society， 2019， 39（7）：2463-2471.
    [35] FRIEDEL T， TRAVITZKY N， NIEBLING F， et al. Fabrication of polymer derived ceramic parts by selective laser curing [J]. Journal of the European Ceramic Society， 2005， 25（2/3）：193-197.
    [36] ZOCCA A， GOMES CM， STAUDE A， et al. SiOC ceramics with ordered porosity by 3D-printing of a preceramic polymer [J]. Journal of Materials Research， 2013， 28（17）：2243-2252.
    [37] ZOCCA A， ELSAYED H， BERNARDO E， et al. 3D-printed silicate porous bioceramics using a non-sacrificial preceramic polymer binder [J]. Biofabrication， 2015， 7（2）： 025008.
    [38] LIU G， ZHAO Y， WU G， et al. Origami and 4D printing of elastomer-derived ceramic structures [J]. Science Advance， 2018， 4（8）：10.
    [39] CHEN J， WANG Y， PEI X， et al. Preparation and stereolithography of SiC ceramic precursor with high photosensitivity and ceramic yield [J]. Ceramics International， 2020， 46（9）：13066-13072.
    [40] PARK S， LEE D H， RYOO H I， et al. Fabrication of three-dimensional SiC ceramic microstructures with near-zero shrinkage via dual crosslinking induced stereolithography [J]. Chemical Communications， 2009，32：4880-4882.
    [41] MOTT M， EVANS J R G. Solid freeforming of silicon carbide by inkjet printing using a polymeric precursor [J]. Journal of the American Ceramic Society， 2001， 84（2）：307-313.
    [42] BALDWIN L A， RUESCHHOFF L M， DENEAULT J R， et al. Synthesis of a two-component carbosilane system for the advanced manufacturing of polymer-derived ceramics [J]. Chemistry of Materials， 2018， 30（21）：7527-7534.
    [43] CHEN H， WANG X， XUE F， et al. 3D printing of SiC ceramic： Direct ink writing with a solution of preceramic polymers [J]. Journal of the European Ceramic Society， 2018， 38（16）：5294-5300.
    [44] XIONG H， CHEN H， ZHAO L， et al. SiCW/SiCP reinforced 3D-SiC ceramics using direct ink writing of polycarbosilane-based solution： Microstructure， composition and mechanical properties [J]. Journal of the European Ceramic Society， 2019， 39（8）：2648-2657.
    [45] LARSON C M， CHOI J J， GALLARDO P A， et al. Direct ink writing of silicon carbide for microwave optics [J]. Advanced Engineering Materials， 2016， 18（1）：39-45.
    [46] PHAM T A， KIM D P， LIM T W， et al. Three-dimensional SiCN ceramic microstructures via nano-stereolithography of inorganic polymer photoresists [J]. Advanced Functional Materials， 2006， 16（9）：1235-1241.
    [47] WANG M， XIE C， HE R， et al. Polymer‐derived silicon nitride ceramics by digital light processing based additive manufacturing [J]. Journal of the American Ceramic Society， 2019， 102：5117-5126.
    [48] MOYANO J J，MOSA J，APARICIO M，et al.Strong and light cellular silicon carbonitride-reduced graphene oxide material with enhanced electrical conductivity and capacitive response [J]. Additive Manufacturing， 2019，30： 100849.
    [49] KEMP J W， HMEIDAT N S， COMPTON B G. Boron nitride-reinforced polysilazane-derived ceramic composites via direct-ink writing [J].Journal of the American Ceramic Society， 2020， 103（8）：4043-4050.
    [50] 陈曼华，陈朝辉，肖安.先驱体紫外光固化法制备隔热涂层[J].功能材料， 2004， 35（Z1）：1722-1724.CHEN M H， CHEN Z H， XIAO A. Heating insulating coating preparation by UV-curing of pre-ceramic [J]. Journal of Functional Materials Contents， 2004， 35（Z1）：1722-1724.
    [51] 宋家乐，陈立新，张教强，等.三元巯基乙烯基硅氮烷UV固化制备聚合物陶瓷前驱体[J]. 高分子材料科学与工程， 2009， 25（3）：69-72.SONG J L， CHEN L X， ZHANG J Q， et al. Preparation of polymer derived ceramic precursor of thiol-vinyl silizane cured by UV [J]. Polymer Materials Science and Engineering， 2009， 25（3）：69-72.
    [52] GYAK K W， JEON S， HA L， et al. Magnetically actuated SiCN-based ceramic microrobot for guided cell delivery [J]. Advanced Healthcare Materials， 2019， 8（21）：e1900739.
    [53] GYAK KW， VISHWAKARMA NK， HWANG YH， et al. 3D-printed monolithic SiCN ceramic microreactors from a photocurable preceramic resin for the high temperature ammonia cracking process [J].Reaction Chemistry & Engineering， 2019， 4（8）：1393-1399.
    [54] XIAO J， LIU D， CHENG H， et al. Carbon nanotubes as light absorbers in digital light processing three-dimensional printing of SiCN ceramics from preceramic polysilazane [J]. Ceramics International， 2020， 46（11）：19393-19400.
    [55] JANA P， SANTOLIQUIDO O， ORTONA A， et al. Polymer-derived SiCN cellular structures from replica of 3D printed lattices [J]. Journal of the American Ceramic Society， 2018， 101（7）：2732-2738.
    [56] LI S， DUAN W， ZHAO T， et al. The fabrication of SiBCN ceramic components from preceramic polymers by digital light processing （DLP） 3D printing technology [J]. Journal of the European Ceramic Society， 2018， 38（14）：4597-4603.
    [57] LI S，ZHANG Y，ZHAO T，et al.Additive manufacturing of SiBCN/Si3N4w composites from preceramic polymers by digital light processing [J]. RSC Advances， 2020， 10（10）：5681-5689.
    [58] 张建柯，陈立新，张红祥，等.紫外光固化含硼氮六环的硅硼氮碳烷陶瓷单源先驱体的合成、表征及性能研究[J].化学学报，2012，70（8）：1035-1042.ZHANG J K， CHEN L X， ZHANG H X， et al. Synthesis， characterization and performance study of borosilazane as UV-curable borazine-type single source precursors for SiBNC ceramic [J]. Acta Chimica Sinica， 2012， 70（8）：1035-1042.
    [59] KOROLEVA A， DEIWICK A， NGUYEN A， et al. Osteogenic differentiation of human mesenchymal stem cells in 3-D Zr-Si organic-inorganic scaffolds produced by two-photon polymerization technique [J]. Plos One， 2015， 10（2）：18.
    [60] FU Y L， CHEN Z W， XU G， et al. Preparation and stereolithography 3D printing of ultralight and ultrastrong ZrOC porous ceramics [J]. Journal of Alloys and Compounds， 2019， 789：867-873.
    [61] FU Y， XU G， CHEN Z， et al. Multiple metals doped polymer-derived SiOC ceramics for 3D printing [J]. Ceramics International， 2018， 44（10）：11030-11038.
    [62] FU S， LIU W， LIU S， et al. 3D printed porous beta-Ca2SiO4 scaffolds derived from preceramic resin and their physicochemical and biological properties [J]. Science and Technolody of Advanced Materials， 2018， 19（1）：495-506.
    [63] SAINZ MA， SERENA S， BELMONTE M， et al. Protein adsorption and in vitro behavior of additively manufactured 3D-silicon nitride scaffolds intended for bone tissue engineering [J]. Materials Science and Engineering： C， 2020， 115：110734.
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

潘振雪,郭香,张宗波,李永明,徐彩虹.3D打印用硅基陶瓷前驱体研究进展[J].宇航材料工艺,2022,52(1):11-21.

复制
分享
文章指标
  • 点击次数:1574
  • 下载次数: 2834
  • HTML阅读次数: 411
  • 引用次数: 0
历史
  • 收稿日期:2021-02-17
  • 最后修改日期:2022-02-21
  • 录用日期:2021-05-08
  • 在线发布日期: 2022-02-25
  • 出版日期: 2022-02-28
文章二维码

您是本站第 6847893 访问者

京公网安备：11010602060147号 京ICP备06019415号-2

地址：北京9200信箱73分箱

邮编：100076 传真：010-68383237

电话：010-68383269 E-mail：703@china.com

版权所有：宇航材料工艺 ® 2025 版权所有