固体火箭发动机壳体复合裙RTM成型技术
作者:
作者单位:

西安航天复合材料研究所,西安 710025

作者简介:

赵文斌,1967年出生,本科,高级工程师,主要从事树脂基复合材料的研究工作。E-mai:zhaowenbin43@163.com

通讯作者:

中图分类号:

TB332

基金项目:


RTM Forming Technology for Composite Skirts of Solid Rocket Motor Case
Author:
Affiliation:

Xi’an Aerospace Composites Research Institute,Xi’an 710025

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    树脂传递模塑工艺(RTM)可实现复合材料承力构件高表面质量净尺寸成型。以A配方为树脂基体、3K缎纹碳布为增强材料,采用RTM工艺制备了固体火箭发动机壳体复合裙。分析了A配方的 RTM工艺特性及树脂浇铸体性能,介绍了复合裙注射模具和注射设备,讨论了RTM工艺参数及复合裙材料性能。结果表明:RTM复合裙纤维体积分数达54.5%,联合载荷(轴压+弯矩)条件下轴压达748 kN,弯矩达94 N·m;纯轴压载荷达1 062 kN,纯弯矩载荷达143.1 N·m,壳体复合裙整体强度高,满足设计和使用要求。

    Abstract:

    Resin transfer moulding(RTM) technology can be used to realize high surface quality and net size moulding of composite force-bearing components.Composite skirt of solid rocket motor case was prepared by RTM process using formula A that resin is as matrix and 3K satin carbon cloth as reinforcement material.The RTM process characteristics of A formula and the properties of resin castable were analyzed,the injection mould and equipment for composite skirt were introduced,the RTM process parameters and the properties of composite skirt materials were discussed.The results show that the fiber volume fraction of composite skirt reached 54.5%.Under combined load(axial compression +bending moment),the axial compression reaches 748 kN and the bending moment reaches 94N·m, pure axial compression load reaches 1 062 kN,pure bending moment load reaches 143.1 N·m.High strength of shell composite skirt meets the design and application repuirements.

    参考文献
    相似文献
    引证文献
引用本文

赵文斌,王静,尹术帮.固体火箭发动机壳体复合裙RTM成型技术[J].宇航材料工艺,2020,50(1):49-52.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2019-06-20
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2020-02-17
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭