YG 刀具与7050 铝合金加工性能匹配研究
DOI:
作者:
作者单位:

潍坊科技学院

作者简介:

通讯作者:

中图分类号:

TG7

基金项目:


Matching Between YG Tools and 7050 Aluminum Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以7050 铝合金为研究对象ꎬ使用YG3 和YG6 两种刀具对其进行切削试验ꎮ 试验结果表明:YG3
    刀具切削力和表面粗糙度值高于YG6 刀具ꎬYG6 切削表面形貌明显优于YG3 刀具ꎬ说明YG6 刀具与7050 铝
    合金加工性能匹配性好ꎮ

    Abstract:

    In order to explore the matching performance between YG tool and 7050 aluminum alloy.In this pa ̄
    perꎬ7050 aluminum alloy was selected as the research object. Two kinds of cutting tools for cutting test were YG3 and
    YG6.The test results show that the value of cutting force and surface roughness of YG3 tools is higher than that of YG6
    toolsꎻ The cutting surface topography of YG6 tool is better than YG3 tool.It shows that performance matching of YG6
    is better between tool and 7050 aluminum alloy than that of YG3.

    参考文献
    相似文献
    引证文献
引用本文

刘炳昌.YG 刀具与7050 铝合金加工性能匹配研究[J].宇航材料工艺,2016,46(3).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭