雷达吸波材料表面波抑制性能测试技术
DOI:
作者:
作者单位:

电子科技大学电子工程学院

作者简介:

通讯作者:

中图分类号:

TB3

基金项目:


Technology of Surface Wave Suppression PerformanceTesting for Absorbing Material
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    分析了雷达吸波材料对表面波抑制性能的作用机理并设计测试系统来测试材料对表面波的抑制
    性能ꎮ 在X 波段(8~12 GHz)利用喇叭天线发射电磁波ꎬ以掠入射角度投射到金属板上形成表面波ꎬ覆盖于金
    属板上的聚四氟乙烯将反射的电磁波束缚在介质中并沿金属板向前传播ꎮ 利用电场探针来检测接收到的电磁
    能量ꎬ对比放置吸波材料前后的结果ꎬ以此来评估吸波材料对表面波的抑制性能ꎮ 并对两种吸波材料进行测
    试ꎬ取得了良好的效果ꎬ说明了该测试方法的可行性和有效性ꎮ

    Abstract:

    This paper analyzes the mechanism of surface wave suppression for absorbing material and proposes a
    novel test system to measure the suppression effectiveness of the absorbing material. Horn antenna is used for radiating
    electromagnetic energy to the conducting plane in a grazing angle range from 8 GHz to 12 GHzꎬ and electric field
    probe is produced to detect received electromagnetic energy. By comparing test curves which is covered and uncovered
    the absorbing material sampleꎬ the surface wave suppression effectiveness of the absorbing material can be obtained.
    Two kind of radar absorbing materials are measured by the novel test systemꎬdemostrating the relibity of the system.

    参考文献
    相似文献
    引证文献
引用本文

王 超1&#;2 李 恩1&#;2 郑 虎1&#;2.雷达吸波材料表面波抑制性能测试技术[J].宇航材料工艺,2016,46(3).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭