ZrB2 改性C/ C-SiC 复合材料性能研究
DOI:
作者:
作者单位:

北京动力机械研究所高超声速冲压发动机技术重点实验室

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of ZrB2 on Properties of C/ C-SiC Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用碳纤维复合网胎针刺预制体,通过溶液浸渍工艺制备了碳纤维增强C/ C-SiC 和C/ C-SiCZrB2
    陶瓷基复合材料,并对材料的力学、热物理和烧蚀性能进行了分析对比。结果表明:针刺C/ C-SiC-ZrB2
    复合材料的面内弯曲强度、厚度方向的压缩强度、层间剪切强度分别为199、274 和19. 3 MPa,各性能均低于对
    应的针刺C/ C-SiC 复合材料。针刺C/ C-SiC-ZrB2 材料与针刺C/ C-SiC 材料相比,热导率得到大幅度提高,
    而线胀系数略微有所降低。2 500 K、600 s 风洞试验后,针刺C/ C-SiC-ZrB2 复合材料表现出良好的抗氧化烧
    蚀性能,质量烧蚀率约0. 4×10-4g/ s。

    Abstract:

    Carbon fiber needling preform reinforced C/ C-SiC composites and C/ C-SiC-ZrB2 composites were
    prepared by liquor dipping process. The mechanical, thermal and ablation properties of the composites were investigated
    and compared. The results show that the flexural strength,compress strength and shear strength of the C/ C-SiCZrB2
    composite are 199 MPa, 274 MPa and 19. 3 MPa respectively. These mechanical properties of the C/ C-SiCZrB2
    composite are all lower than the counterpart properties of C/ C-SiC composite. Compared with C/ C-SiC composite,
    thermal conductivity of the C/ C-SiC-ZrB2 is greatly higher and the linear expansion coefficient of the C/ C-SiCZrB2
    composite is slightly lower. The ablation behavior of them is studied by arc wind tunnel test at a temperature of 2
    500 K for 600 s. The C/ C-SiC-ZrB2 composite has an average mass ablation rate of 0. 4×10-4 g/ s and has excellent
    properties of oxidation resistance and ablation resistance.

    参考文献
    相似文献
    引证文献
引用本文

王 琴. ZrB2 改性C/ C-SiC 复合材料性能研究[J].宇航材料工艺,2012,42(6).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭