固体火箭发动机硅橡胶密封圈贮存寿命分析
DOI:
作者:
作者单位:

西安航天动力技术研究所,燃烧、流动和热结构国家级重点实验室

作者简介:

通讯作者:

中图分类号:

基金项目:


Storage Life of Silicone Rubber Sealing Ring Used in Solid Rocket Motor
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用某硅橡胶密封圈加速老化性能数据,采用逐次逼近以及数据拟合方法,推导出幂指数老化模
    型参数,获得该硅橡胶老化反应速率以及老化性能规律,该硅橡胶材料100益下老化约30 d 相当于常温
    (25益)下贮存15 a;开展了压缩永久变形状态下密封圈应力分析,获得密封圈老化后应力分布,密封圈有压缩
    永久变形时最大接触应力小于无压缩永久变形时,30% 压缩量、30% 压缩永久变形率时最大接触应力水平与
    25%压缩量、无压缩永久变形时基本一致;建立不同老化状态与应力状态相关性,以30% 压缩永久变形率为老
    化指标,该硅橡胶密封圈的贮存寿命约为12. 4 a。

    Abstract:

    Based on the ageing behavioral data of a certain silicone rubber sealing ring used in solid rocket mo鄄
    tor,the power-exponent ageing model parameters and the regularity of ageing behaviour have been received using ap鄄
    proximation and fit methods. The result of these tests reveals that storage of such type of silicone rubber for one month
    at the temperature of 100益equals to 15 years storage at 25益. Simultaneously, numerical caculations about stress
    distribution at the state of permanent compression deformation have been processed, and the state of stress distribution
    of silicone rubber sealing ring after ageing is obtained, accordingt to which the view that the maximum strsess of per鄄
    manent deformation with compression is smaller than that without compression is put forward. At the end of this pa鄄
    per, relativity of stress distribution and permanent deformation is established. Taking thirty percent permanent com鄄
    pression deformation as a rule, the storage life of silicone rubber sealing ring is about 12. 4 years.

    参考文献
    相似文献
    引证文献
引用本文

杨喜军.固体火箭发动机硅橡胶密封圈贮存寿命分析[J].宇航材料工艺,2012,42(5).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭