X-Cor 夹层结构的平压性能试验
DOI:
作者:
作者单位:

南京航空航天大学无人机研究院

作者简介:

通讯作者:

中图分类号:

基金项目:


Experimental on Compressive Behavior of X鄄Cor Sandwich
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过对不同的z鄄pin 角度、面板厚度、去除泡沫处理的X鄄Cor 夹层结构试样进行平压性能试验和
    分析比较,得到其破坏模式及不同设计参数对性能的影响。试验结果表明:X鄄Cor 夹层结构中z-pin 和泡沫存
    在协同增强效应;增大z鄄pin 端部约束和减少z鄄pin 的植入角度能提高平压性能;但z鄄pin 角度为0毅的夹层结构
    平压性能对植入角的角偏差缺陷更敏感,缺陷的存在影响承力性能。

    Abstract:

    Comparison tests of compressive properties were carried out on different z鄄pin angle,face skin thick鄄
    ness,with and without foam,which could be acquired the failure modes of X鄄Cor sandwich and the effect of different
    design parameters on compressive properties. Experimental results show that the combination of z鄄pins and foam core
    lead to a synergistic strengthening. Increasing restriction of z鄄pin爷s end and decreasing the angle between z鄄pin and
    face sheet can enhace the compressive properties. But the compressive properties of z鄄pin angle with 0毅are more to
    sensitive to angle deviation error,and it directly affects behavior of perfect mechanicals properties.

    参考文献
    相似文献
    引证文献
引用本文

单杭英. X-Cor 夹层结构的平压性能试验[J].宇航材料工艺,2012,42(3).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭