不同分子量固态与液态聚碳硅烷的黏度特性
DOI:
作者:
作者单位:

航天材料及工艺研究所,先进功能复合材料技术重点实验室,

作者简介:

通讯作者:

中图分类号:

基金项目:


Viscosity of Solid and Liquid Polycarbosilanes WithDifferent Molecular Weight
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用GPC、流变仪等分析手段对不同分子量的固态PCS 和液态PCS 的黏度进行表征。分析了
    PCS 分子量、软化点及黏度特性之间的关系。此外还用热重法对固态和液态PCS 陶瓷产率进行表征。结果表
    明,LPCS 在室温黏度较低,陶瓷产率较高(77%),而固态PCS 熔体在>200益具有较低黏度(500 mPa·s),因此
    LPCS 更适于用作PIP 法制备陶瓷基复合材料浸渍前驱体。

    Abstract:

    The viscosity of solid and liquid polycarbosilanes with different molecular weight were investigated
    based on GPC and Rheometer analysis. And the relationship between molecular weight,soft temperature and viscosity
    were established. The ceramic yields of these polycarbosilanes were reported based on TGA. The results indicated
    LPCS had lower viscosity (under 200 mPa·s) at room temperature and higher ceramic yields (77%, N2 ), whereas
    the molten solid PCS had viscosity of 500 mPa·s only above 200益so that LPCS is more suitable for room temperature
    PIP than PCS to make ceramic matrix composites

    参考文献
    相似文献
    引证文献
引用本文

胡继东.不同分子量固态与液态聚碳硅烷的黏度特性[J].宇航材料工艺,2012,42(2).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭