块状RF 有机气凝胶的常压干燥制备及结构控制
DOI:
作者:
作者单位:

北京化工大学,化工资源有效利用国家重点实验室

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation of Monolithic RF Organic Aerogels by Ambient Dryingand Their Control in Microstructure
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以间苯二酚和甲醛为原料,无水碳酸为催化剂,在常压干燥条件下可成功制备出具有良好纳米网络
    结构的RF 气凝胶。采用SEM、比表面测量仪及孔径分布仪(BET)等测试手段对其结构进行了表征与测试。结果
    表明,通过改变R / C 可以实现有机气凝胶的颗粒直径及孔洞由纳米到微米级的连续调节. 此外采用常压干燥法所
    得到的有机气凝胶样品具有321 ~632 kg/ m3的低密度,其中密度为428 kg/ m3的样品的比表面积为188 m2 / g。

    Abstract:

    RF aerogels, which process good nano-network structure, were prepared by resorcinol and formalde鄄
    hyde diluted in deionized water in the presence of sodium carbonate as catalyst, followed by ambient drying. The struc鄄
    ture of the porous organic aerogels was investigated by SEM and the measurement of pore size distribution. The special
    surface area was determined with BET. The results showed that the structure of organic aerogels are controlled from mi鄄
    cropore to macropore by changing the concentration of catalyst. The samples prepared by ambient drying have low densi鄄
    ty of 321 to 632 kg/ m3,and the sample density is 428 kg/ m3 with specific surface area of 188 m2 / g.

    参考文献
    相似文献
    引证文献
引用本文

郭康.块状RF 有机气凝胶的常压干燥制备及结构控制[J].宇航材料工艺,2012,42(2).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭