可见光迷彩低红外发射率薄膜制备及其特性
DOI:
作者:
作者单位:

北京航空航天大学

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Characterization of Visible Camouflage FilmsWith Low Infrared Emissivity
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用多弧离子镀技术,在Al 基底上制备了TiO2 / TiN 多层膜。通过控制基底材料的粗糙度使制
    备出的薄膜在可见波段具有非镜面反射效果。采用扫描电镜、红外辐射率测量仪、紫外-可见-近红外光光度
    计等测试手段对薄膜样品进行了表征。结果表明,采用多弧离子镀法在Al 基底上制备了结合力良好、具有迷
    彩效果的低红外发射率薄膜。研究发现,随氧化层厚度增加,薄膜发射率趋向稳定(0. 2 左右)。薄膜电阻随氧
    化层厚度的变化无明显变化。

    Abstract:

    The TiO2 / TiN films were grown by multiarc plasma deposition on Al substrates. Through controlling
    the roughness of the substrate material, the prepared films possessed nonspecular reflection effect in visible band.The films were analyzed and characterized by scanning electron microscopy, infrared radiation measurement instrument and the UV visible spectrum. The results show that visible camouflage films with low infrared emission and good binding force can be grown by multi arc plasma deposition on Al substrate. The results show also that the infrared emission tends to be stabilized at a value of about 0. 2, as the thickness of the oxide layer increased.

    参考文献
    相似文献
    引证文献
引用本文

王丛 刁训刚 曹摇晔.可见光迷彩低红外发射率薄膜制备及其特性[J].宇航材料工艺,2010,40(6).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭