不同填料对氢化丁腈橡胶耐烧蚀材料性能的影响
DOI:
作者:
作者单位:

山东非金属材料研究所,济南

作者简介:

通讯作者:

中图分类号:

基金项目:


Influence of Different Fillers on Performance of HNBR Ablative Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以氢化丁腈橡胶(HNBR)为基体,分别添加有机纤维1、有机纤维2、碳纤维粉和纳米无机物,通
    过形貌分析和X 射线能谱仪(EDS),研究不同用量下不同烧蚀填料对HNBR 烧蚀性能及力学性能的影响,发
    现在该试验条件下,添加有机纤维1 和纳米无机物的HNBR 能获得较好的烧蚀性能;添加有机纤维1 时HNBR
    材料的力学性能很差,纳米无机物的加入对其力学性能影响不大;添加有机纤维2 和碳纤维粉的HNBR 力学
    性能变化不大,但烧蚀性能不理想。

    Abstract:

    Organic fiber 1,organic fiber 2,carbon fiber powder and nanoinorganic substance were added to HN
    BR matrix respectively. By morphology analysis and Xray energy dispersive spectroscopy (EDS),the effect of different amount of different fillers on ablation performance and mechanical properties of HNBR was studied. It is foundthat HNBR with organic fiber 1 and nano inorganic substance possesses good ablation performance. HNBR with organic fiber 1 has poor mechanical properties,while nano inorganic substance have little impact on mechanical properties ofHNBR. HNBR with organic fiber 2 and carbon fiber powders has little impact on mechanical properties but unsatisfactory ablation performance.

    参考文献
    相似文献
    引证文献
引用本文

张春梅 杜华太 庞明磊 周摇义.不同填料对氢化丁腈橡胶耐烧蚀材料性能的影响[J].宇航材料工艺,2010,40(6).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭