纤维缠绕不等极孔椭球类容器的应力分析及优化
作者:
作者单位:

作者简介:

王荣, 1988 年出生, 硕士研究生, 主要从事复合材料纤维缠绕压力容器结构设计的研究。

通讯作者:

中图分类号:

基金项目:

国家自然科学基金(1130216) ; 陕西省自然科学基础研究计划(2013JQ6018)


Stress Analysis and Optimization for Filament Wound Ellipsoidal Pressure Vessels With Unequal Polar Openings
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于微分几何推导出了不等极孔椭球类容器纤维缠绕的非测地线稳定缠绕方程,并根据薄膜理 论、层合板理论、蔡-吴失效准则得到了赤道处纤维层的最小厚度1. 281 7 mm,计算出的纤维方向的应力小于 纤维的极限强度3. 92 GPa。发现纤维缠绕椭球容器的应力状态是赤道处最先发生破坏,且会出现局部失效现 象。以缠绕层最小质量M 为目标函数,蔡-吴失效准则为约束条件,在给定内压5 MPa 的情况下,得到了优化 后的容器质量为34. 072 kg。相比于等极孔的容器而言,非测地线缠绕具有高度非线性、不稳定性及精度难以 控制等问题。

    Abstract:

    Mechanical property of ellipsoid pressure vessels with unequal polar openings is studied in this paper. The steady formulas for filament on a surface of revolution are derived from differential geometry. Based on the membrane theory, laminate theory and Tsai-Wu failure criterion, the thickness of the equator is 1. 281 7 mm, the stress value of the fiber direction is less than the fiber strength 3. 92 GPa. The stress state of the filament wound ellipsoidal vessel is that the damage happens first in equator, and local failure phenomenon is happened. To minimum winding layers weight M as the objective function, Tsai-Wu failure criterion as the constraint condition, under the condition of 5 MPa internal pressure, we achieve the optimized weight is 34. 072 kg. Compared to ellipsoid pressure vessels with equal polar openings, it has highly non-linear, instability and high precision.

    参考文献
    相似文献
    引证文献
引用本文

王 荣,何钦象,祖 磊.纤维缠绕不等极孔椭球类容器的应力分析及优化[J].宇航材料工艺,2014,44(4):25-30.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2014-05-22
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-02-10
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭